Customization: | Available |
---|---|
Certification: | CE, ISO |
Customized: | Customized |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Diameter | ||||||
No. | Item | Unit | Specification diameter | Mark | ||
1 | Low pressure pulse bag filter model | HLDM-1600-185KW | Negative pressure | |||
2 | Filter area Filter |
m2 | 1600 | |||
3 | Air volume handled Filt |
m3/h | 100000 | |||
4 | Air speed for filter |
m/min | 0.9-1.0 | |||
5 | No. Of chamber | 3 | Single rowR Double row | |||
6 | Filter bag | Specification | mm | Ф159×6000 | ||
Total quantity | piece | 540 | ||||
Highest durable temperature | ºC | 130° | ||||
Filter material Filt |
Polyester needle felt, water and oil-resistant lyester needle felt |
|||||
7 | Bag cage | Specification | mm | Ф147×5950 | ||
Quantity | unit | 540 | ||||
Material | Q235 | Silicon treatment | ||||
8 | Submerged pulse valve | Specification | inch | 3 | ||
Quantity | Piece | 30 | ||||
Diaphragm valve life | One million times | |||||
9 | Ash cleaning offline valve | Specification | FCL-800×1200 | |||
Quantity | Piece | 3 | ||||
10 | Dust collector inlet temperature | ºC | ≤130ºC | |||
11 | Compressive strength | Pa | <8000 | |||
12 | Equipment resistance | Pa | <1500 | |||
13 | Inlet dust concentration | g/Nm3 | 10 | |||
14 | PM emission concentration | mg/Nm3 | <30 | |||
15 | Air leakage rate | static | % | ≤2 | ||
dynamic | % | ≤4 | ||||
16 | dust cleaning pressure | MPa | 0.35-0.45 | |||
17 | Air supply pressure | MPa | 0.5~0.7 | |||
18 | Air consumption | m3/min | 2-3 | |||
19 | dust cleaning method | offline cleaning | ||||
20 | induced fan power | KW | 185 | |||
21 | air volume of induced fan | m3/h | >100000 | |||
22 | induced fan full pressure | Pa | 3600 | |||
23 | Maximum speed of induced fan | r/min | 1450 | |||
24 | YJD-HX-12 Unloader YJD-HX-12 Unloader |
set | 3 | |||
25 | ZBF-3 Warehouse Vibrator ZBF-3 |
set | 3 | |||
26 | (L×W×H) Dimension(L×W×H) |
mm | 18000×7000×12000 | |||
27 | Total power consumption of equipment | KW | 190 | |||
28 | Requirement of Control Power | AC24V,220V±10% single phase electricity 50HZ |
||||
29 | Requirement of Power supply | AC380±10% three-phase four-wire system)single phase electricity 50HZ |